
Grinding Head Pressure: Dead Weight vs Spring Pressure
Grinding Head Pressure: Dead Weight vs Spring Pressure

Quick Answer
Dead weight gives a constant load and is predictable on flat floors. Spring pressure adds load as the head rises and can help on uneven floors, but it can also lift the head and reduce contact. Use dead weight for stock removal and spring pressure for finishing or for machines designed for it.
What Each System Does
Dead weight is the mass of the machine and any added plates. It does not change with the floor. Spring pressure uses springs or air to push the head down. The force changes as the head moves.
On a planetary grinder, the heads are connected. Adding weight to one head changes the load on the others. Check the machine manual before adding weight.
Cut Rate and Wear
More pressure increases the cut rate up to a point. Beyond that, the segment rubs instead of cutting, and the bond wears unevenly. On soft concrete, too much pressure digs and leaves a wave. On hard concrete, too little pressure glazes the bond.
Setting Pressure
- Start with the machine's standard weight.
- Add weight only if the cut rate is too slow and the segment is wearing evenly.
- Reduce weight if the floor is soft or the machine starts to hop.
- Check the amperage; a rising draw can indicate too much load.
Frequently Asked Questions
Q: Can I add weight to a machine not designed for it?
A: No. Added weight can overload the motor, the bearings and the head. Follow the manual.
Q: Why does the machine hop?
A: Too much pressure, an unbalanced disc or a floor irregularity. Reduce pressure and check the tool.
Q: Does spring pressure work on uneven floors?
A: It can help, but it can also lift the head. Test the result before relying on it.
Conclusion
Use the lightest pressure that keeps the diamond cutting. A WerkMaster double-teardrop segment is a stable stock-removal tool; a Lavina double-button disc is a general finishing choice.
Products used in this guide

WerkMaster Double TearDrop Segment (JOY-WMS-TD2)
View specs →
Lavina Double Button Segment Diamond Grinding Disc (JOY-LVS-2)
View specs →Need this tool for your job?
MOQ 1 · 7–30 days by order quantity · FOB & CIF · free sample on request
Author & Manufacturer
Written and reviewed by JOY TECH - an SGS & BV audited, CE/RoHS certified diamond tools manufacturer founded in 2004, exporting to 50+ countries.
Quality & Compliance
Our factory and quality management system are audited by SGS and Bureau Veritas. Products meet CE/RoHS requirements and every piece is 100% inspected before packing.
Verified Certificates
- • SGS Audited Supplier — Report No. QIP-ASI227442 & QIP-ASR247051
- • Bureau Veritas Verified — Report No. MIC-ASR257059
- • CE & RoHS Certificate of Conformity — No. CS240925001HRZ
