Average response time: under 24 hours
Polishing looks simple but the results depend on the order and the tooling. Restore 50-year-old terrazzo by abrading with coarse metal-bond segments to expose fresh chips, then burnishing with resin pads from 100 up to 1500–3000 grit stage, finishing with a densifying sealing layer or sealing layer. Work wet on terrazzo to protect the softer matrix.
For machine-matched tooling, browse our Diamond Resin Polishing Pads for Concrete & Terrazzo... range.Key points for the polishing sequence.
This stage decides how much reflection the floor finally shows.
What matters most in this stage.
Miss this step and the gloss will not come up evenly.
The practical details.
Crews that rush this part rarely get a mirror finish.
A: For most jobs, Dry is possible but hotter and dustier; wet is safer for the matrix and gives more suitable mirror finish on older floors.
A: In short, Just enough to make chips flush — in most cases 1–2 passes with coarse metal. Too deep creates pitting that must be repaired.
A: The practical answer is, Yes. Densify or seal to protect the matrix and make the mirror finish easier to maintain.
Looking for the right tool? Check our 5''/125mm Diamond Resin Polishing Pads for Concrete .... Looking for the right tool? Check our Diamond Resin Floor Polishing Pads.Work the sequence completely and the surface rewards you with a clean, bright gloss. Restoring terrazzo is a abrade-then-burnish workflow.
Written and reviewed by JOY TECH - an SGS & BV audited, CE/RoHS certified diamond tools manufacturer founded in 2004, exporting to 50+ countries.
Our factory and quality management system are audited by SGS and Bureau Veritas. Products meet CE/RoHS requirements and every piece is 100% inspected before packing.
Verified Certificates
