Skip to content
JOY TECH — Concrete Polishing Tools logo

5'' Dry Diamond Polishing Pad (JOY-SD5)

Scroll
5'' Dry Diamond Polishing Pad (JOY-SD5)
5'' Dry Diamond Polishing Pad (JOY-SD5) - image 1
← Back to POLISHING SOLUTIONS

5'' Dry Diamond Polishing Pad (JOY-SD5)

Category: POLISHING SOLUTIONS

JOY-SD5 | 5'' (125 mm), 2 mm, Segmented dry segment. Grit: 50#, 100#, 200#, 400#, 800#, 1500#, 3000# or 0#, 1#, 2#, 3#, 4#, 5#. Dry polishing of granite, marble, man-made stone and concrete. Dry pads use a heat-resistant resin and an open segment pattern that lets dust escape, so the pad stays cool and keeps cutting without water. They are the practical choice for walls, edges and sites where water is not allowed. Velcro backing. OEM/ODM and custom colours available from JOY TECH.

Model: JOY-SD5


Diameter: 5'' (125 mm)


Thickness: 2 mm


Segment / Pattern: Segmented dry segment


Grit available: 50#, 100#, 200#, 400#, 800#, 1500#, 3000# or 0#, 1#, 2#, 3#, 4#, 5#


Polishing method: dry


Application: granite, marble, man-made stone and concrete


Backing: Velcro (hook-and-loop) backing for angle grinders and floor grinders


Dry pads use a heat-resistant resin and an open segment pattern that lets dust escape, so the pad stays cool and keeps cutting without water. They are the practical choice for walls, edges and sites where water is not allowed.


5'' Dry Diamond Polishing Pad is supplied by JOY TECH, an SGS and Bureau Veritas audited, CE/RoHS certified diamond tools manufacturer since 2004. Factory-direct pricing, bulk order support and OEM/ODM customisation are available.

Overview

Diamond polishing tools use resin-bonded diamond particles to progressively refine ground surfaces into a smooth, glossy finish. Applied in a sequence of increasing grit sizes from 50# to 3000#, these pads and discs transform rough concrete or stone into a reflective, low-maintenance surface. Polishing is the final stage of decorative concrete and stone restoration, producing the high-gloss floors seen in retail stores, warehouses, showrooms, and luxury residences.

Key Features

  • ✓Full grit sequence from 50# to 3000# for a complete polishing system
  • ✓Resin bond provides flexibility and conformability for uniform gloss on uneven surfaces
  • ✓Hook-and-loop (Velcro) or magnetic backing for fast pad changes
  • ✓Suitable for both wet and dry polishing applications
  • ✓Consistent color and clarity — no burnishing or chemical hardeners required for basic gloss

Specifications

Bond TypeResin-bonded / hybrid
Diamond Grit50# – 3000# polishing sequence
BackingHook & loop (Velcro) or magnetic
Working SurfaceConcrete, marble, granite, terrazzo
Use ConditionWet polishing recommended
Thickness3mm – 10mm working layer

Applications

  • ✓Polished concrete floor finishing
  • ✓Marble and granite polishing and restoration
  • ✓Terrazzo floor polishing
  • ✓Countertop and vanity polishing
  • ✓Stone floor maintenance and honing

How to Choose

  1. 1

    Start with a metal-bond 50# or 100# grit to flatten the floor, then transition to resin-bond pads at 200# or 400#

  2. 2

    For standard gloss, follow 50→100→200→400→800→1500→3000#; for satin finish stop at 800#

  3. 3

    Use densifier (lithium or sodium silicate) after 200# grit to harden the surface and improve polish clarity

  4. 4

    Select pad diameter matching your machine — 3" for edge polishers, 17" for floor buffers, 20–27" for planetary polishers

Terminology

Resin Bond

A phenolic or epoxy matrix that holds diamond particles for polishing. Softer than metal bond, it conforms to surface irregularities and produces a fine finish.

Grit Sequence

The progressive order of diamond grit sizes used to polish a surface. Each finer grit removes the scratches left by the previous one, building clarity and gloss.

Densifier

A chemical hardener (typically lithium silicate) applied during polishing that reacts with concrete to increase surface hardness and improve polish retention.

Clarity

The ability of a polished surface to reflect images clearly. Measured in gloss units (GU), with 3000# polished concrete typically reaching 70–90 GU.

Safety Tips

  • ⚠Wear safety glasses and non-slip footwear — wet polishing creates slippery surfaces
  • ⚠Ensure electrical cords are rated for wet conditions and use GFCI-protected outlets
  • ⚠Keep hands and clothing away from rotating pads — use the machine handle at all times
  • ⚠Change pads only after the machine has come to a complete stop

Frequently Asked Questions

What grit sequence should I follow for polished concrete?

Start with 50# metal bond, then 100#, 200# resin, 400#, 800#, 1500#, and finish at 3000# for a high-gloss surface. Skip grits only if the previous scratch pattern is fully removed. Apply densifier after 200#.

Wet vs dry polishing — which is better?

Wet polishing produces a finer finish, reduces dust, and extends pad life, but requires water management. Dry polishing is faster and more convenient on job sites without water access. Resin pads work well in both conditions.

How long do resin polishing pads last?

A resin pad typically covers 200–500 m² per grit step. Coarser grits (50–200#) wear faster than finer grits. Using water significantly extends pad life by 30–50%.

Why is my polished floor not shiny?

Common causes: skipping grit steps, insufficient passes at each grit, hardener not applied or not cured, or pads glazed over. Ensure each grit fully removes previous scratches, apply densifier after 200#, and dress pads if they stop cutting.

Can I polish outdoor concrete?

Yes, but outdoor polished concrete requires a penetrating sealer to protect from UV and weathering. Use a 800# finish (satin) rather than 3000# for better slip resistance outdoors.

What is the difference between polishing and burnishing?

Polishing uses diamond abrasives to physically cut and refine the surface. Burnishing uses a very fine abrasive or chemical to create a temporary surface shine that wears off. Polished concrete is permanent and requires no wax.

Warranty & Returns

12-Month Warranty

Every product is covered by a 12-month warranty against manufacturing defects in materials and workmanship. If a defect is confirmed, we replace the tool or refund the order — your choice.

Inspection on Delivery

Please inspect goods within 7 days of receipt. For any quality issue, send photos or a short video to our support team — we respond within 24 hours and settle replacements or returns promptly.

Author & Manufacturer

Written and reviewed by JOY TECH - an SGS & BV audited, CE/RoHS certified diamond tools manufacturer founded in 2004, exporting to 50+ countries.

Quality & Compliance

Our factory and quality management system are audited by SGS and Bureau Veritas. Products meet CE/RoHS requirements and every piece is 100% inspected before packing.

Verified Certificates

  • • SGS Audited Supplier — Report No. QIP-ASI227442 & QIP-ASR247051 (Audit Jan 29, 2024)
  • • Bureau Veritas Verified — Report No. MIC-ASR257059 (Audit Feb 20, 2025)
  • • CE & RoHS Certificate of Conformity — No. CS240925001HRZ (Issue Sep 25, 2024)
SGS audit report scan - JOY TECHBureau Veritas audit certificate scan - JOY TECHCE RoHS certificate of conformity scan - JOY TECH

Full certificate copies available on request — request certificates.

Trade Terms & Ordering

MOQ1 pc — sample and trial orders accepted
Lead time7–30 days depending on order quantity
Trade termsFOB and CIF both supported
SamplesFree samples available on request (freight collect)
PackagingStandard export packaging, or customised to your requirement (custom packaging requires a higher MOQ)

Verified customer feedback

Quotes sent by contractors in Germany, Australia and Poland after running our tools on real jobs. Names withheld at their request.

Australia5/5
“Unparalleled and vastly superior to what Australian suppliers have been giving us. They run true and balanced, cut as they should, with high diamond concentration evenly distributed — the price/quality is hard to beat.”
2026-04-21 · verified purchase
Read the full case →
Australia5/5
“1,700 m² done with your blades and they are not worn out yet.”
2025-06-27 · verified purchase
Read the full case →

All feedback →

Request a Factory Quote

Average response time: under 24 hours

Or WhatsApp: +86 185 5928 2197 · [email protected]

FAQ

GET A QUOTEWhatsApp