Average response time: under 24 hours
The right tool is the one matched to the machine, the material and the job. Tools like WerkMaster PCD coating layer stripping Tool (JOY-WM-PCD1R1) and WerkMaster PCD epoxy resin stripping Tool (JOY-WM-PCD1S1) are purpose-built for this work. The most suitable tool for stripping road tar, bitumen, and heavy black mastic from a concrete slab is a PCD (polycrystalline diamond) scraping tool—typically a half-moon or 1/4-circle PCD block mounted on a trapezoid or puck holder.
For machine-matched tooling, browse our Diamond Trapezoid Grinding Disc (JOY-TP-R3) for Floo... range.How the tool works.
Bitumen, tar, and asphalt-based mastic are thermoplastic: they soften with heat and gum up normal diamond bonds.
Getting the spec right avoids a wasted order.
What to check before buying.
Tooling that fits and matches the bond runs noticeably better.
Key selection points.
For floors that mix bitumen with old epoxy resin glue, WerkMaster PCD epoxy resin stripping Tool (JOY-WM-PCD1S1) handles the glue layer residue that follows the tar.
Fit is the first filter - the rest is performance.
How the tool works.
Some flooring crews mist the floor lightly, though this creates grinding slurry and is optional.
Getting the spec right avoids a wasted order.
What to check before buying.
Tooling that fits and matches the bond runs noticeably better.
Key selection points.
If the old coating layer contains coal-tar epoxy resin (common on parking decks), inspect local rules: some jurisdictions classify it as hazardous and require licensed disposal.
Fit is the first filter - the rest is performance.
A: In short, For small areas yes, but it is slow and drives tar deeper into pores. A PCD grinder is far faster and leaves a cleaner slab.
A: The practical answer is, PCD can scuff soft concrete. Keep pressure light and follow with a 30/40 metal-bonded matrix pass to blend the surface.
A: For most jobs, Above 5 mm, score or mill the bulk first. PCD then strips the remaining film without bogging down.
A: In short, Heated bitumen releases fumes. Ventilate the area, wear a dust mask, and use a fine dust extractor. Stop open flames—bitumen is combustible.
Looking for the right tool? Check our Single Rhombus Segment Diamond Trapezoid Grinding Di.... Looking for the right tool? Check our Double Rhombus Segment Diamond Trapezoid Grinding Disc.A matched tool is cheaper per square metre than a bargain tool. Keep passes light, follow with a 30/40 metal-bonded matrix cleanup, and ventilate the work area because heated bitumen produces fumes.
Written and reviewed by JOY TECH - an SGS & BV audited, CE/RoHS certified diamond tools manufacturer founded in 2004, exporting to 50+ countries.
Our factory and quality management system are audited by SGS and Bureau Veritas. Products meet CE/RoHS requirements and every piece is 100% inspected before packing.
Verified Certificates
