Average response time: under 24 hours
Polishing looks simple but the results depend on the order and the tooling. Resin-bonded matrix pads are the final burnishing tools — they refine scratch marks and produce mirror finish (800–3000#). Ceramic bond pads sit between metal and resin: they cut more than resin, less than metal, and bridge the scratch mark pattern (50–400#).
For machine-matched tooling, browse our Typhoon Type Diamond Copper Bond Hybrid Resin Polish... range.Key points for the polishing sequence.
This stage decides how much reflection the floor finally shows.
What matters most in this stage.
Our Ceramic Bond Transitional Pads and Resin burnish pads are designed to work as a matched pair in this sequence.
Miss this step and the gloss will not come up evenly.
The practical details.
Crews that rush this part rarely get a mirror finish.
A: For most jobs, For light surface prep on soft concrete, yes. For heavy coating layer stripping or leveling, metal-bonded matrix is still needed — ceramic doesn't cut that aggressively.
A: In short, No — ceramic cuts and refines; resin polishes. They're sequential, not substitutes.
A: The practical answer is, Ceramic bond pads typically wear slower than resin at equivalent grit stages, but resin pads are cheaper and purpose-built for the mirror finish stages.
Looking for the right tool? Check our Diamond Resin Polishing Pads for Concrete & Terrazzo.... Looking for the right tool? Check our Diamond Resin Floor Polishing Pads.Work the sequence completely and the surface rewards you with a clean, bright gloss. JOY TECH supplies both bonds in full grit stage ranges for planetary grinders.
Written and reviewed by JOY TECH - an SGS & BV audited, CE/RoHS certified diamond tools manufacturer founded in 2004, exporting to 50+ countries.
Our factory and quality management system are audited by SGS and Bureau Veritas. Products meet CE/RoHS requirements and every piece is 100% inspected before packing.
Verified Certificates
