Average response time: under 24 hours
Grinding problems are usually tooling or technique issues rather than defects in the concrete. Redi-Lock and bolt-on are the two dominant attachment systems for concrete abrading shoes. Redi-Lock is faster to change (seconds), bolt-on is more secure for heavy PCD coating layer stripping.
For machine-matched tooling, browse our 3'' Metal Bond Diamond Grinding Disc with 4 Segments range.What you should know before starting.
Redi-Lock is a Husqvarna-developed dovetail system.
Contractors who skip this stage usually end up redoing the floor.
The key points in practice.
Bolt-on shoes have two (or sometimes four) countersunk screws that fasten through the shoe into the adapter plate.
This is where most crews get it right - or lose time.
A closer look at the details.
Getting this part right saves a full re-pass later.
What you should know before starting.
Browse the full range in our concrete abrading discs category.
Contractors who skip this stage usually end up redoing the floor.
A: For most jobs, Mostly yes. Husqvarna Redi-Lock is the de facto standard; HTC, Scanmaskin, and others use compatible dovetails. Always inspect the adapter seat before ordering.
A: In short, In most cases yes, by fitting a Redi-Lock adapter plate. It is one of the cheapest upgrades for a mixed toolroom.
A: The practical answer is, The cam was not fully locked, or the seat was worn. Always listen for the click and inspect the seat monthly.
Looking for the right tool? Check our 3'' Metal Bond Diamond Grinding Disc with 10 Segments. Looking for the right tool? Check our 3'' Metal Bond Diamond Grinding Disc with 5 Segments.Keep the sequence disciplined and the tooling sharp, and the surface will come out level and clean. Redi-Lock wins on speed, bolt-on wins on torque.
Written and reviewed by JOY TECH - an SGS & BV audited, CE/RoHS certified diamond tools manufacturer founded in 2004, exporting to 50+ countries.
Our factory and quality management system are audited by SGS and Bureau Veritas. Products meet CE/RoHS requirements and every piece is 100% inspected before packing.
Verified Certificates
